SMD LED Upgrade Kit for 2005-2011 Toyota Tacoma Instrument Cluster
This is an LED kit for 2005-2011 Toyota Tacoma Instrument Cluster. This kit will include all LEDs necessary to change the back-lighting and needle color (you will need to scrape the orange strip off the needle). With this kit you can change the back-lighting to one color and the needles to another color. We will include 2 extra LEDs of each color just in case. Our LEDs are a direct replacement to the original LEDs.
Professional Installation Is Advised
Soldering skills are required to get this job done. We are not responsible for damages done to the circuit board during the installation process. If you would like for us to install the LEDs we charge $100 for that service you can find it here.
All LEDs are polarity sensative. There is a little notch on each corner of the LED indicating the negative side. Remove and install one LED at a time while carefully keeping track of the negative side. On the circuit board there is a little dot near each LED showing where the negative side should be, it can still be confusing in some areas so i recommend keeping track of the notch in the led.
If you don't have any soldering tools this KIT is a good place to start it will provide everything you need to get the job done.
All returns must be in original uninstalled condition
If you need an LED kit for another vehicle contact us.